New reproduction of the correct TALBOT outside mirror. From 1958 to 1963 Porsche installed only this mirror. This mirror was was also available
by the accessories catalogue since they were not standard equipment, except in some European countries. .
Correct silver grey base seal and authentic looking box.

Excellent reproduction of the correct reclining REUTTER seats. Included are 4 distance holders - Resitex. Not all early seats need them.

NEW nice reproduction of the hand brake chrome handle. Early 356 A T1 had grooved handle. After 1957 the 356 A T2 up to 356 C are the same.

For seal beam and for new LED light. clear HELLA lense. Also used on very early 911

Cabriolet 356 A - C polished aluminium rear trim strip (nail strip) Excellent and concours correct reproduction.
L 915mm, W 10mm, 12 nails 15mm long.

Excellent quality and fit

356 C Grey
Driver 644 521 915 00 Pass. 644 621 916 00

911-912, 1965 - 1967, Grey
Driver 901 521 915 00 Pass. 901 521 916 00

911-912, 1968, Black
Driver 901 521 915 00 Pass. 901 521 916 00

NOTE - same part number - indicate Grey or Black !!

911-912, 1969 - 1973, Black
Driver 901 521 915 01 Pass. 901 521 916 01

911-912, 1974 - 1976, Black
Driver 911 521 915 01 Pass. 911 521 916 01

New door hinge pin kit all 356

Very nice reproduction of the chrome grab handle. Made in Italy. Includes hardware. Made in brass casting with deep chrome and correct edge.

Excellent reproduction of the Cabriolet nail strip at
the rear top bow.

New reproduction - Made in Italy
ELE 572 693 06 - Rubber T-piece left
ELE 572 694 06 - Rubber T-piece right
ELE 572 691 06 - Rubber sleeve left
ELE 572 692 06 - Rubber sleeve right
Sold in pairs only !! Good high quality soft rubber, finish acceptable.

Coming soon
ELE 571 012 06 - Air collection funnel

New front hood lock for 356 up to T5. Many looks have been over-sprayed several time or the springs are worn out. Original lock were painted in car color !

Bolt kit for the rear seats for all 356. Special 8mm bolt with rubber washer and wavy washers.

New production of the fresh air valve. Does not have the teeth adjuster but fine to replace rusty or missing ones.

644 47 026 Steering column support - bracket
Speedster - Convertible D
644 47 026 2 Steering column support - bracket
356 Coupe - Cabrolet

644 47 213 Steering column rubber support
Speedster - Converible D
644 47 213 1 Steering column rubber suppoert
356 Coupe - Cabriolet
644 347 755 05 repl. number

Interior lights for the pre A. Limited inventory, old stock. (old part. nr. 356 61 060)

901 631 111 00 Lens clear, asym. flat, 190mm, fits 356 to 911 - 1967
(644 631 111 00)

901 631 111 01 Lens yellow, asym. flat, 190 mm, fits 356/911 - 1967

901 631 111 02 Lens clear, H1, late contour, clear top, 911 1967 - 1970

911 631 111 00 Lens clear, H4, late contour fluted, 911 1971 - 1989

911 631 111 01 Lens yellow, H4, fluted, 911 1971 - 1989

Perfect script, real gold plated 1500SUPER

Production of the mounting ring, spring ring and base plate for the steering wheel.
ELE 613 809 00 Hornbutton mounting ring
911 613 807 00 Horn-button spring plate 356 - 911
911 613 808 00 Horn-button base plate 356 - 911

new available spare parts for the HELLA headlights
limited quantities

- 644 631 111 02 spare glass
- 644 631 114 00 spare rubber gasket
- 644 631 117 02 spare reflector

New production of the horn spring plate and the horn contact plate

New Old Stock - HELLA original headlights for Lefthand traffic - UK, SA, J etc. limited quantities.

New excellent reproduction of the original fog light switch for the 356 B - C. Yellow control light, also available with red, blue and green.

Excellent reproduction of the Cabrio top frame for all B to C cars. With some minor changes it should also fit the 356 A T2 cars. Correct tubings, latches, castings and rear wooden bow. The front wood bow is easy available. We have sold over 30 without any complains.
IN STOCK - SOLD EXCLUSIVELY BY:
Classic Parts, Peter Hofmann, Hartmanns Au 12, D-6619 Saarbrücken
Phone: +49 (0)681 85 15 50, Fax: +49 (0)681 85 54 39
Email: hofmann@classic-parts.com, Website: www.classic-parts.com

First used only on the Speedster then also on the other 1500 356 cars.

NEW reproduction of the MALL Durant outside mirror.
Excellent quality with correct adjusting angle, perfect shape and correct base gasket.
Comes with flat glass or convex glass.
Fits all 356 C models from 1964 up to 911, 912 up to model 1968.

NEW !
after 2 years development we can proudly offer excellent ignition switch and door locks. They are the late C version (K300) but also fit the early cars. Many ignition switches do not work correctly because of worn out contacts and weak springs. Many 356 have 3 different keys, one for each door and the third one for the ignition. Finally we can offer a attractive solution

ELE 613 101 06 Ignition lock with 2 keys
ELE 613 901 00 Door lock left - right, 2 keys
ELE 613 101 99 Ignition-Door lock kit, 4 keys

1- ELE 613 901 10 Key blank 300
2- ELE 613 191 03 Ign. switch bezel
3- ELE 613 505 00 Light switch bezel
4- ELE 613 101 20 Ign. lock nut
5- ELE 613 101 21 Ign. lock nut washer
6- ELE 531 606 01 Rubber washer receiver
7- ELE 531 607 01 Nylon collar door lock

Your 356 parts retail dealer should have them in stock soon.

Finally the correct, OE quality dash script for the Speedster, Conv. D and Roadster. Gold - silver with threaded studs.
Also small run made in gold - gold for the very early Speedster.

Original OEM Meisterschaft badge 1957 with stud. Perfect and crisp made from original tooling.

Perfect reproduction of the late T 6 fuel tank

NEW
Outstanding, perfect reproduction of the early 356 interior rear view mirror. For 356 from 1952 pre A up to B T5, Coupe and Cabrio, Speedster, Convertible D and Roadster. Also available both fully correct holding clamps.
Mirror size 175 x 60 mm, very nice satin dull finish to prevent reflections, fully correct mounting arms, excellent mirror glass mounted flawlessly.
When we started this project over one year ago, we noticed in the Porsche spare parts books that the same part number was used for all 3 different style mirrors, also the 2 very different holding clamps used the same part number !!
Original early part number for the mirror was 356 70 033 replaced by 644 731 101 01 for all 3 mirrors and for both clamps, early number 357 70 303 replaced by 644 731 150 21.
Mirrors
ELE 731 101 01 - mirror with early 2 hole mount,
ELE 731 101 02 - mirror with late, 1956 to 1961, 1 hole mount
ELE 731 101 40 - mirror with round arm Speedster, Conv. D, Roadster, Cab
Clamps
ELE 731 150 21 - early double clamp
ELE 731 150 25 - late single clamp.

Correct original HELLA head lights, connector plugs and holding screws.

Excellent new reproduction of the famous AERO mirror used on Porsche 356 A includes pre-A Speedster and Convertible D. 1955 to 1960. Outstanding chrome, sharp production stamp and perfect edge (not like the cheap early reproductions). Additional we made the mirror with Convex glass, also available separate, increases the rear view vision angle by 50%. Good for your safety !!

New excellent exclusive reproduction of the "day-night" interior mirror.
644 731 101 06 day-night, Break-a-way mount
644 731 101 07 day-night, 3 screw mount,
644 731 101 26 day-night, C Cabriolet,
901 731 010 20 Int, mirror, day-night, Porsche 911 - 912, - 1968

Very nice reproduction of the "1950-1956 Deutsche Sportwagen Meisterschaften" dashboard badge.

Very nice and exact reproduction of the correct TALBOT outside mirror used from 1958 to 1962 on all 356. Correct light grey rubber base gasket.
Can be used left and right. Pictures of a 100% original paint and never touched T5 Roadster.

Very nice reproduction of the sun-visor, fully correct material, comes with 2 hole or 1 hole pivots.

Outstanding reproduction of the original 356 idiot lights, green, red and blue. Also used on later 356 for fog light and heated windscreen control lights.

Excellent reproduction of the batterie cover for the 356 A and B T5.

Outstanding reproduction of Super hub cap for 356 A and all B. Weight 600 gr - 21 ounce. Check the weight of the cheap repro's that you can buy........

Expecially for all Roadster and Speedster, ruber gromet for the windshield wisher arms.

Very nice and authentice glove box lid liner with new elastic band. Correct grey German material.

Original German 6V flasher relais.

Correct reproduction for all 356 A front bumper license plate holder with correct screws. Can be used for B and C for under front bumper. Stainless quality.

Original German quality support straps, 4 lenght, hand brake cable, fuel lines and brake lines.

For all 356, 356 A and 356 B T5 this chrome screws with ALLOY spacer were used. Get rid of the ugly white plactic ones.

Now offering pre finished acrylic inserts. Proper thickness, correct color "dark brown" correct shape.

New reproduction, authentic appearance at a reasonable price. Complete assembly with rubber base, German bulb sockets and correct rubber boots.
Left, red/red NLA 631 403 00

Right, red/red NLA 631 404 00

Early front beehive NLA 631 009 00
Frosted lens only NLA 631 009 01
Rear beehive red NLA 631 008 00
Red lens only NLA 631 008 01
Orange lens only NLA 631 008 02

NLA 615 105 00 6V
NLA 615 105 01 6V 25A fuse
NLA 615 106 00 12V
NLA 615 106 01 12V 20A fuse

Control rod connectors, smooth and hex, with sleeves plus nuts and washers. 24 pus kit

External screw tip NLA 361 202 10
Internal screw tip NLA 361 202 20
Valve stem holder
Drum brake NLA 68 211
Disc brake NLA 361 121 00

Finally, glove boxes that are authentic. Moulded of paper and flocked with the correct color blend.
356 pre A NLA 70 123 356A NLA 552 501 00
356B NLA 552 501 01 356C NLA 552 501 02

Light and wiper 644 613 505 00
Ignition 644 613 191 03
Wiper -BT5 644 628 128 00

Our pins are original German, precision ground with cotter pin hole. 4 pcs. kit

We now offer an excellent reproduction of the aluminium beadings for across the dash and the door lops. Six piece kit has correct diameter polished aluminium tubing with proper vinyl insert.

Beading kit, Speedster NLA 552 371 40
Bead.kit Conv D, Roads. NLA 552 371 41

Corner angle kit. The corner angel brackets are usually rusted beyond use. Our new kit gives you a set/4 of zinc plated angels plus screws for both windows.

Correctly sized chrome Phillips screws, chrome spacer washer with square hole and phenolic inner spacer. 28 pcs. set

On late 356A and some early 356B cars, a metal tab was under the first hole of the seat rail and extended out to hold the tunnel mat.

We offer three choices of seat frames for Speedsters. 1. original wood reproduction, 25mm thick ash with double finger joints. 2. Aluminium frames with welded joints 3. Steel GT frames which were used in late A and B/C factory race cars.
Wood frame NLA 521 001 00
Alum. frame NLA 521 010 40
Steel frame NLA 521 011 42 see picture
Hinge left NLA 521 351 40
Hinge right NLA 521 352 40

These attach to the wood Speedster seat frames. Rails are plated nickel and handles are chrome.
Upper rail set NLA 521 033 00
Lower rail set NLA 521 031 00

For rear of Speedster seats. Bolt for height adj. , jam nut and correct buffer.12 pcs. kit

We have a limited supply of new original hood handles, diecast from the original HUF mold

Cabrio ?J" piece NLA 561 752 00
Cabrio turnbuckle 644 563 081 20
Ball pin 644 025 741 00
Roadster shackle 644 561 451 41
Speedster shackle 540 561 451 40